How to Recover Mac Data from Hard Drive That Makes a Clicking Noise

Recover Mac Data from Hard Drive That Makes a Clicking Noise

Summary: Is your Mac hard drive making a clicking noise or dying? At times, due to higher frequency usage, the storage drive might encounter some issues and clicking noise is taken to be one of the major problems. It is a sign that the hard drive is about to fail. This can cause you to lose important data. If your hard drive is making a clicking noise, you have opened the right page. Read this article to find out how you can recover data from a Mac hard drive that is making clicking noises.

At times, the Mac HDD might make some weird clicking or buzzing sound. This is a surefire indication that the hard drive is going to fail. Basically, it serves as a reminder that the Mac hard drive is experiencing some physical issues. No matter it is making intermittent or continuous noise, you should know that the data stored on the hard drive is at stake. Hence, you need to pay attention to the hard drive failure symptoms. Moreover, to avoid data loss, back up your data as soon as you can.

But in case you lose your data due to this, you can perform Mac drive recovery using software to recover your files. 

Most Common Symptoms Your Hard Drive is About to Fail

Here are a few symptoms that indicate that the hard drive is about to fail.

  • The detected hard drive is inaccessible
  • Can’t perform writing or reading operations
  • Unable to detect the hard drive at times
  • The hard drive unmounts or ejects itself
  • Applications are taking time to load, or running applications are freezing

You are going to experience hard drive issues on Mac sooner or later. So, you need to take quick actions to prevent data loss.

What to Do for Recovering Mac Data from a Failing Mac HDD?

Your first step should be to back up the data, immediately. It is necessary to check if Mac is able to detect the hard drive or not. In case it can, back it up. Connect the Mac hard drive and then go to the hard drive icon present on the desktop to access it. Most of the time that not, the icon doesn’t show up. In such a case, go to ‘Finder’ in your menu bar and find out the hard drive from the ‘Devices’ section.

In case you are still not able to locate the connected hard drive, go to ‘Disk Utility’ for locating the clicking Mac hard drive, choose it, and then just click on ‘Restore Option’.

If the hard drive is corrupt or contains some bad sectors and Disk Utility can’t fix the problem, your only option is to use hard drive recovery software like TechSoftwareLogic. With the help of this, you will be able to recover all files from a corrupt or failing HDD.

Using Mac Data Recovery Software as a Solution

You can use Mac data recovery software for restoring data from the Mac hard drive that is making a clicking noise, provided the hard drive gets recognized by Disk Utility. Nevertheless, in case the Mac hard drive is not showing up in Disk Utility, the software will be unsuccessful in recovering data from it.

In case the Mac HDD is accessible, use Mac data recovery software to restore your data. TechSoftwareLogic Data Recovery Mac Software is one of the best software that can fix Mac data loss problems, efficiently. Also, with the help of this software, it is easy to recover the digital media files from Time Machine backup, emptied Trash, and encrypted storage device.

Let’s take a look at the tasks that the software can perform. 

  • It facilitates rebuilding corrupt, deleted, and damaged files. 
  • The software can recover data from unbootable volumes
  • Supports RAW recovery for recovering data from a highly corrupt hard drive
  • It can recover data from a storage device that is password-protected.
  • If a BootCamp partition of the Mac system gets corrupted, the software can easily restore data from it. 

How to Restore Files from a Clicking HDD Using Recovery Software?

To recover your files using TechSoftwareLogic Mac Data Recovery Software, you have to follow the steps enumerated below.

1)Install the TechSoftwareLogic Mac Data Recovery Software on Mac and then run it. Thereafter, connected to the hard drive that has been affected.

2)Choose ‘What to Recover Interface’ to customize the scan. 

3)Select the hard drive that is experiencing the problem from the list of devices available and then click on ‘Scan’.

4)TechSoftwareLogic will scan the Hard Drive. Following the scanning process, a list of recoverable files will be shown to you. 

5)To preview a certain file, you have to double-click on it and then choose the files you would like to recover. 

6)Click on ‘Recover’ to save the files to a specific location.

So, you can see how easy it is to restore or recover your data from a failing hard drive using TechSoftwareLogic Data Recovery Software. It can restore your crucial data in no time. 

However, if your hard drive is severely damaged or corrupted, the recovery tool might not be able to recover the data from it. For example, if the hard drive’s mechanical parts fail or get exposed to high magnetic files, there is a head crash or has a scratch on the surface of the platter, it might be difficult to recover data from it. However, these cases are pretty rare. 

Bottom Line

Sure, your hard drive can fail or get damaged. Regardless of the reason, it is necessary to back up your data and identify the symptoms or warnings of Mac hard drive failure.

In case the Mac hard drive is accessible, you need to back up the data that is stored on it. You also have the option to use Mac data recovery software to recover the data. Make sure that after you restore your data from the Mac, replace the hard drive with a new one. 

Leave a Reply

Your email address will not be published. Required fields are marked *

  • Recovering since 1993
  • 2 Million + Customers
  • Money Back Guarantee
  • Support Monday To Friday
  • 100% Secure